Ultimately, it’s up to you to decide which paint finish you prefer. If you’re looking for a paint job that’s more traditional and classic, then flat black is probably your best bet. CleanupĬlean brushes and tools with warm, soapy water.If you want a paint job that’s sleek and modern, then matte black is probably the way to go. Normally dries to touch in 30 minutes to 1 hour at 77☏ (25☌) and 50% relative humidity. gallon (3.78 Liters) of paint.Īpply only when air, product, and surface temperatures are between 50☏ (10☌) and 90☏ (32☌). If necessary, thin with up to 1/4 pint (118 mL) of water per U.S. When using more than one container of the same color, intermix to ensure color uniformity.

For airless spray application, the minimum recommended tip size is. Apply with a high quality brush, roller, paint pad or by spray equipment. Clean up carefully with a HEPA vacuum and a wet mop.īefore you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN.

If you scrape, sand, or remove old paint, you may release lead dust or fumes. Prime all bare walls, wood, drywall, plaster, masonry, metal and porous surfaces with the appropriate primer. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. Sand all glossy, rough, and patched surfaces. Putty all nail holes, and caulk all cracks and open seams. Remove all loose and peeling paint, dirt, grease, and any other surface contaminants.

Flat black paint